Before you upload your designs, you need to make sure they are saved properly. We accept a wide range of file types, all submitted files should be 300 DPI or higher and the exact size you need for the best result when printing.
Unfortunately DTF cannot print transparency so all pixels you want printed out must be 100% opaque.

To avoid the white under base from peeking under the edge of our prints, we add a small bleed to all the designs. To ensure we can take the proper precaution to avoid these white edges, we recommend to avoid having any areas that are smaller than 6 pixels across

Our user-friendly interface makes it super easy to upload your images, size them, position them, and even make some last minute adjustments. You can easily duplicate images and space them evenly to allow for easy cutting.

1. All sheets are 23" wide, choose the length that works for you.
2. Upload Your Images or pick from our catalog
3. Use our tools to size, duplicate, and arrange your designs on the board
4. Review the sheet and ensure everything looks good for printing!

We cannot guarantee your press will work with the same settings as ours so we highly recommend testing to see what settings work best with YOUR equipment.